This is the best place to find Knife Patterns
https://en.wikipedia.org/wiki/Blade#Knife_patterns

Horace Kephart (1862-1931) is a familiar name to bushcrafters along with George Washington Sears (See Knife 59) and was one of the leading outdoor writers of his time. Kephart designed the knife. This is how he described it in the first edition of Camping and Woodcraft: “This knife weighs only 4 ounces. It was made by a country blacksmith, and is one of the homeliest things I ever saw; but it has outlived in my affections the score of other knives that I have use”.
This Brut de Forge Bowie was forged from a similar tine as Knife – 42 Hunter Forged from an Implement Tine. To the right it is being normalized. Notice the groove (or fuller) in the tang. I cut that with the belt grinder. It serves a couple of purposes. It lightens the knife. It makes less surface area of the tang that must be flattened and gives the epoxy some space.
Because this Antler Handled Carving Knife’s antler was put on with the base end first, it required a little different technique. It seems the base is bone and is harder. It did not soften like a cut end that exposes the softer insides. To get around this I drilled a hole then slightly widen it to be about the width of the tang. I drilled with a drill bit the approximate width and used a Dremel with a cutter to widen it.
-
[…] Next you should see Knife Patterns […]
[…] Note: A Drop Point is the preferred knife blade for big game hunters. Drop Point blades are: durable, versatile, and […]