If you choose, you can make your own mosaic pins. Mosaic
pins are simply pins with a decorative look. To make a mosaic pin, simply fill a tube with whatever you
think will look cool. Here is a few I did.
At this point I decided I wanted to stabilize the wood I used for handles. Stabilizing Scales (and handles) helps eliminate the possibility of the handle going bad because of moisture causing expansion or contraction if it dries out. It minimizes or eliminates warping, cracking and other issues that can occur with wood when used under extreme circumstances. It also would allow me to use some spalted wood that wouldn’t normally be a good handle.
The brass finger guard was fitted buy cutting the slot, then slowly filing it until it fit. The blade was also filed slightly to create a very shallow shoulder for the brass to slide up to. It was then drilled for 2 brass 1/8” rods which were peened on (after heat treating).
This Knife “The Knife that has been remade” certainly helped with my knife making education. I made a lot of mistakes and most of this Knife is a transition of those mistakes from trial and error and fix this and try that.
I have Used Ferric Chloride full strength. Some knife makers suggest diluting it. It will take some experimenting to determine which works best for you.
To make the containers for the ferric acid I took 2 pieces of 3” PVC and plugged one end and added a cap on the top. I found this sand blast medium barrel perfect for a base for a bit more stability. Clamping it to the wall or a post will work as well. You just do not want it to be tipped over.
The Leuku Knife, also known as a Sami knife (Sami: stuorraniibi = “big knife”, Finnish: lapinleuku or leuku), is a large knife traditionally used by the Sami people. I decided to try some Laurel Mountain Barrel Brown & Degreaser to brown the blade. This is how it came out!
Leuku knife In keeping with the History quest, According to https://en.wikipedia.org/wiki/Sami_knife the Leuku also known as a Sami knife (Sami: stuorraniibi = “big knife”, Finnish: lapinleuku or leuku), is a […]
Horace Kephart (1862-1931) is a familiar name to bushcrafters along with George Washington Sears (See Knife 59) and was one of the leading outdoor writers of his time. Kephart designed the knife. This is how he described it in the first edition of Camping and Woodcraft: “This knife weighs only 4 ounces. It was made by a country blacksmith, and is one of the homeliest things I ever saw; but it has outlived in my affections the score of other knives that I have use”.
This Brut de Forge Bowie was forged from a similar tine as Knife – 42 Hunter Forged from an Implement Tine. To the right it is being normalized. Notice the groove (or fuller) in the tang. I cut that with the belt grinder. It serves a couple of purposes. It lightens the knife. It makes less surface area of the tang that must be flattened and gives the epoxy some space.
Because this Antler Handled Carving Knife’s antler was put on with the base end first, it required a little different technique. It seems the base is bone and is harder. It did not soften like a cut end that exposes the softer insides. To get around this I drilled a hole then slightly widen it to be about the width of the tang. I drilled with a drill bit the approximate width and used a Dremel with a cutter to widen it.